Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a KTM EXC 300

Model: Ktm Exc 300
Part: Engine oil

Video tutorial

Below are the instructions that will allow you to carry out the regular maintenance service by changing the engine oil on the KTM EXC 300 enduro bike. First, drain the engine oil by unscrewing the drain bolt found on the sump; let the oil drain into a container for about ten minutes, cleaning the drain plug of any metallic residues, as shown in the video.

At this point, unscrew the filler cap and top up with new engine oil that meets the correct specifications, filling until you reach the maximum level!


Posted on 6 July 2026 by ScegliAuto


Related tutorials

How to Change the Gear Oil in the KTM EXC-W 300
How to Change the Gear Oil in the KTM EXC-W 300
Exc 300 In this video, you will see how to change the transmission oil while performing the routine maintenance service on the KTM EXC-W 300 enduro bike. Fir…
Engine Oil Change on a KTM 300 EXC
Engine Oil Change on a KTM 300 EXC
Exc 300 In this video tutorial, you will see how to perform the routine maintenance oil change on a KTM 300 EXC. First, remove the skid plate by unscrewing t…
How to Replace the Oil in the Ktm Exc 300 Gearbox
How to Replace the Oil in the Ktm Exc 300 Gearbox
Exc 300 Today, in this brief and simple guide, you will learn how to perform the routine maintenance oil change for the gearbox of the Ktm Exc 300 two-stroke…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos