Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil Filter on KTM Duke 690

Model: Ktm Duke 690
Part: Oil filter

Video tutorial

In this tutorial, you will learn how to remove and replace the oil filter, change the engine oil, and perform the regular maintenance service on a KTM Duke 690. First, drain the old engine oil by unscrewing the drain bolt located under the engine; allow it to drain into a container for at least ten minutes.

Next, proceed with the oil filter replacement; on the right side, there is a cover secured with two screws that need to be removed using a socket spanner.

Finally, extract the filter and replace it, as shown in the video!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Changing Engine Oil and Oil Filter on KTM Duke 690
Changing Engine Oil and Oil Filter on KTM Duke 690
Duke 690 In this video tutorial, we will see how to change the engine oil and oil filter on a KTM Duke 690, performing the regular maintenance service. First,…
How to Perform a Service on KTM Duke 690
How to Perform a Service on KTM Duke 690
Duke 690 In this video, you will see how to perform a routine maintenance service by changing the oil and oil filter on a KTM Duke 690. First, warm up the eng…
How do you replace the motor oil in the KTM Duke 690?
How do you replace the motor oil in the KTM Duke 690?
Duke 690 To ensure that the oil change of the KTM Duke 690 takes place, you will need to unscrew the drain plug of the oil pan located in the central lower pa…

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos