Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Side Fairings on a KTM Super Duke 1290

Model: Ktm Super Duke 1290 R
Part:

This video is currently unavailable

First, remove the rear seat using the designated key, as shown in the video. At this point, you can also detach and remove the main seat.

Remove the black cover near the tank by pulling it forward with your hands. Now, the operation is really simple: just unscrew all the bolts shown in the video and remove the fairing, and you're done.

Repeat the operation on the other side. This procedure is necessary if you want to replace or repaint the fairings.

For reassembly, proceed in reverse order. Good luck and see you next time!


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a KTM Super Duke 1290 R?
How to Replace the Battery on a KTM Super Duke 1290 R?
Super Duke 1290 R To replace the battery on a KTM Super Duke 1290 R, loosen the screws that secure the seat, located on the right and left sides. Once all screws are l…
How to Replace the Radiator on the KTM Super Duke 1290 R?
How to Replace the Radiator on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the radiator on the KTM Super Duke 1290 R, start by loosening the screws that secure the side fairing panels located just below the fuel t…
How to Replace the Exhaust on the KTM Super Duke 1290 R?
How to Replace the Exhaust on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the exhaust on the KTM Super Duke 1290 R, loosen the screws securing the plastic protection panel located at the bottom of the exhaust. On…

How to Replace the Starter Motor on a Derbi Senda 125?

To replace the starter motor on a Derbi Senda 125, you need to unscrew the bolts securing the cover located on the right side of the bike, under which the clutch is also found. Once the cover is removed, you will locate the starter motor at the top left relative to the clutch. By unscrewing the nuts that secure it in place, you can free it from its housing to insert a new replacement part. After the replacement, reattach the cover, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos