Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the KTM Super Duke 1290 R, loosen the screws securing the plastic protection panel located at the bottom of the exhaust. Once this panel is removed, unscrew the bolts that hold the exhaust to the respective supports at the top. This will allow you to free it from its housing and replace it with a new spare part. After positioning it correctly, secure it to the supports and tighten the clamp screw that connects it to the exhaust pipe.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the KTM Super Duke 1290R?
How do you replace the exhaust pipe of the KTM Super Duke 1290R?
Super Duke 1290 R The procedure for replacing the exhaust on the KTM Super Duke 1290 R involves loosening the screws that secure the protective panel located at the bo…
Removing the Rear Wheel on KTM Super Duke R 1290
Removing the Rear Wheel on KTM Super Duke R 1290
Super Duke 1290 R In today's video, we'll see how to remove the rear wheel from a KTM Super Duke 1290 R. To remove it, first take off the retaining ring found on the w…
How to Reset the Service Light on a KTM Super Duke 1290 R
How to Reset the Service Light on a KTM Super Duke 1290 R
Super Duke 1290 R This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos