|
Do it yourself
| |||
| ||||
|
Model: Ktm Super Duke 1290 R
In today's video, we'll see how to remove the rear wheel from a KTM Super Duke 1290 R. To remove it, first take off the retaining ring found on the wheel nut using pliers; then, with a socket wrench and extension, unscrew the central wheel nut. At this point, lift the bike with the rear stand and remove the exhaust silencer by unscrewing the bracket bolt and the fixing screw of the collector clamp; all that's left is to extract and remove the rear wheel, as shown in the video!
Updated on 7 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Super Duke 1290 R
To replace the chain on a KTM Super Duke 1290 R, first loosen the bolts securing the cover protecting the sprocket on the left side of the bike: afte…
Super Duke 1290 R
In this video tutorial, you will learn how to remove and replace the brake and clutch levers on a KTM Super Duke 1290 R, following the instructions b…
Super Duke 1290 R
To replace the headlight bulb on the KTM Super Duke 1290 R, loosen the two screws located on the upper side of the headlight assembly: once these two…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.274
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
