Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a KTM Super Duke 1290R?

Model: Ktm Super Duke 1290 R
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a KTM Super Duke 1290 R, loosen the screws securing the protective panel at the bottom of the exhaust. Once this panel is removed, you can loosen the screws that secure the exhaust to its supports at the top. This will allow you to remove it from its housing and replace it with a new part.

After positioning it correctly, secure it to the supports and tighten the fixing ring screw that connects it to the collector.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the KTM Super Duke 1290 R?
How to Replace the Exhaust on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the exhaust on the KTM Super Duke 1290 R, loosen the screws securing the plastic protection panel located at the bottom of the exhaust. On…
Removing the Rear Wheel on KTM Super Duke R 1290
Removing the Rear Wheel on KTM Super Duke R 1290
Super Duke 1290 R In today's video, we'll see how to remove the rear wheel from a KTM Super Duke 1290 R. To remove it, first take off the retaining ring found on the w…
How to Replace the Chain on a KTM Super Duke 1290 R?
How to Replace the Chain on a KTM Super Duke 1290 R?
Super Duke 1290 R To replace the chain on a KTM Super Duke 1290 R, first loosen the bolts securing the cover protecting the sprocket on the left side of the bike: afte…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos