Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Chain, Sprocket, and Pinion on a KTM Duke 125

Model: Ktm Duke 125
Part:

Video tutorial

To remove the chain from the KTM Duke 125, use a chain breaker, which will break the chain at a point allowing for removal. Using a socket and a fixed handle spanner, remove the rear wheel axle; before removing the wheel itself, also remove the ABS sensor.

Then you can slide out the axle and remove the wheel. To remove the pinion, loosen the three screws shown in the video, put the bike in gear so the pinion locks, and then remove the other two screws.

At this point, you can remove the pinion and replace it along with its washer.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Duke 125 In today's video, you will find instructions to remove and replace the drive chain on the Ktm Duke 125, as well as the 390. First, lift your motorcyc…
Duke 125 In today’s video, you will see the steps to remove and replace the rear sprocket in simple steps. First, lift the motorcycle at the rear using a stan…
Duke 125 If you own a KTM Duke 125 and want to learn how to manually reset the oil light, follow these steps carefully. First, turn on the ignition of your KT…

How to replace the air filter on the Aprilia Tuareg 660?

To replace the air filter on the Aprilia Tuareg 660, loosen the screws securing the panel located at the front of the vehicle, just behind the handlebars. Once these screws are loosened, remove the panel to access the underlying filter. The old filter can be extracted, and a new one can be inserted into its housing. After replacement, cover the filter with the panel and check that the engine is running properly.

Watch the video!


by ScegliAuto

More videos