Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Chain on the Ktm Duke 125 - 390

Model: Ktm Duke 125
Part:

Video tutorial

In today's video, you will find instructions to remove and replace the drive chain on the Ktm Duke 125, as well as the 390. First, lift your motorcycle with the rear stand and start by unscrewing the central nut of the rear wheel to remove it; then remove the chain from the wheel, subsequently removing the cover of the engine sprocket, as shown in the video.

Next, remove the sprocket by unscrewing the nut to replace the chain with a new one; correctly insert it between the sprocket and the crown and reassemble everything!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plug on a KTM Duke 125 - 390
How to Replace the Spark Plug on a KTM Duke 125 - 390
Duke 125 .. plug on the KTM Duke 125, as well as the Duke 390. First, remove the fuel tank by taking off the rider's and passenger's seats; then unscrew all the.. …
How to Replace the Spark Plug on KTM Duke 125-390
Duke 125 .. and replace the spark plug on a KTM Duke 125 and 390, following the instructions below. First, remove the spark plug cap by accessing it inside the trellis.. …
Replace the Rear Brake Pads on the KTM Duke 125 - 390
Replace the Rear Brake Pads on the KTM Duke 125 - 390
Duke 125 .. the rear brake pads on the KTM Duke 125 and 390. First, get a pair of pliers and remove the retaining clip or pin of the brake pads, as shown in.. …

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos