Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Duke 125
Part: Spark plugs

In today's tutorial, you will learn how to replace the engine spark plug on the KTM Duke 125, as well as the Duke 390. First, remove the fuel tank by taking off the rider's and passenger's seats; then unscrew all the screws on the sides, disconnecting the electrical connector and the fuel line. At this point, remove the spark plug cap or connector from the cylinder head; then use a socket spanner with an extension to unscrew and remove the spark plug, replacing it with a new one (with the same heat rating).

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Duke 125 .. and replace the spark plug on a KTM Duke 125 and 390, following the instructions below. First, remove the spark plug cap by accessing it inside the trellis.. …
Duke 125 In this brief and simple guide, remove and replace the engine spark plug on the KTM Duke 125 by following the instructions below. First, place the bi…
Duke 125 In order to replace the spark plug of the KTM Duke 125, you need to remove the coil located on the top of the cylinder of the engine block: the coil …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos