|
Do it yourself
| |||
| ||||
Model: Ktm Duke 125
In order to replace the spark plug of the KTM Duke 125, you need to remove the coil located on the top of the cylinder of the engine block: the coil will be accessible from the right side of the frame, just below the fuel tank. Once the coil is disconnected, the spark plug underneath can be removed using the appropriate socket wrench: at this point, you can insert the new spark plug into its housing, reconnecting the coil. This way, you can start the engine and check that it works.
Posted on 29 May 2024 by ScegliAuto
Video tutorial
Related tutorials
Duke 125
In this video, let's see how to remove and replace the spark plug on a KTM Duke 125 and 390, following the instructions below. First, remove the spar…
Duke 125
In today's tutorial, you will learn how to replace the engine spark plug on the KTM Duke 125, as well as the Duke 390. First, remove the fuel tank by…
Duke 125
In this video, we see how to replace the spark plug on the KTM Duke 125: you need a 13 mm magnetic socket wrench to remove it without worrying about …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
