|
Do it yourself
| |||
| ||||
Model: Ktm Duke 125
In this brief video, learn how to remove and replace the rear brake pads on the KTM Duke 125 and 390. First, get a pair of pliers and remove the retaining clip or pin of the brake pads, as shown in the video; then, pull out the central pin by tapping on the front. At this point, you can remove the old brake pads found inside the caliper; press firmly on the caliper to retract the piston, allowing you to insert the new pads. Follow the video to the end for reassembly!
Updated on 19 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Duke 125
.. plug on the KTM Duke 125, as well as the Duke 390. First, remove the fuel tank by taking off the rider's and passenger's seats; then unscrew all the.. …
Duke 125
.. drive chain on the Ktm Duke 125, as well as the 390. First, lift your motorcycle with the rear stand and start by unscrewing the central nut of the.. …
Duke 125
.. and replace the spark plug on a KTM Duke 125 and 390, following the instructions below. First, remove the spark plug cap by accessing it inside the trellis.. …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
