Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Duke 125
Part:

To replace the levers on the KTM Duke 125, loosen the nut located at the bottom of the lever, which secures it to its pivot. After removing the nut and the pivot, you can slide off the lever itself. By loosening the screws that secure the lever support device, you can remove it and also slide off the old grips. From inside, you will need to remove the cylinder, onto which the new grips will be fitted. Once the replacement is done, reinstall the grips and levers, reassembling all previously removed parts.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Duke 125 To replace the levers on the KTM Duke, unscrew the nut located at the bottom of the pin that secures the lever to its housing. Once the nut is loosen…
Duke 125 The brake and clutch levers of the KTM Duke 125 can be replaced by loosening the nuts located at the base of the levers, allowing them to be detached…
Duke 125 In order to replace the levers of the KTM Duke 125, you need to loosen the nuts located at the base of the lever itself, so that it can be detached f…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos