|
Do it yourself
| |||
| ||||
Model: Ktm Duke 125
To replace the levers on the KTM Duke, unscrew the nut located at the bottom of the pin that secures the lever to its housing. Once the nut is loosened, you can slide the pin out from the top, allowing the corresponding lever to be released. After removing the first lever, perform the same operation on the opposite side: this will allow you to insert the new levers, securing them with the corresponding pins and nuts. Then, check that everything functions correctly.
Updated on 23 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Duke 125
To replace the levers on the KTM Duke 125, loosen the nut located at the bottom of the lever, which secures it to its pivot. After removing the nut a…
Duke 125
The brake and clutch levers of the KTM Duke 125 can be replaced by loosening the nuts located at the base of the levers, allowing them to be detached…
Duke 125
In order to replace the levers of the KTM Duke 125, you need to loosen the nuts located at the base of the lever itself, so that it can be detached f…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.483
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |