Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant on the KTM SXF 450

Model: Ktm Sxf 450
Part: Antifreeze coolant

Video tutorial

In today's tutorial video, follow the main steps to replace the coolant on the KTM SXF 450 with these simple instructions. First, drain the old coolant; to do this, remove the drain screw located on the water pump, as shown in the video.

Next, open the radiator cap and pour in the new antifreeze; now, correctly refit the cap and start the engine to circulate the new coolant!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Service the Water Pump on a KTM SXF 450
How to Service the Water Pump on a KTM SXF 450
Sxf 450 In this guide, you will learn how to service the water pump, including replacing the coolant on a KTM SXF 450, in simple and quick steps. First, blee…
How do you replace the air filter of the KTM SXF 450?
How do you replace the air filter of the KTM SXF 450?
Sxf 450 In order to replace the air filter of the KTM SXF 450, you will need to loosen the screws that secure the side panel of the motorcycle, located under…
How to Change the Engine Oil of the KTM SXF 450
How to Change the Engine Oil of the KTM SXF 450
Sxf 450 To change the engine oil of the KTM SXF 450, loosen the drain plug located at the bottom of the bike to collect all the used oil in a suitably positi…

How to Adjust the Clock on a Harley Davidson Motorcycle

In this video, you can see how to adjust the clock on a Harley Davidson motorcycle: first, turn on the ignition, then use the button located on the left handlebar. The display will show three lights: the ABS, the engine warning light, and the oil light, which will turn off in a few seconds. Pressing the button on the left handlebar will scroll through various information until you reach the time; if you need to adjust it by one hour due to the change from standard to daylight saving time or vice versa, hold down the button and you will be given an option to set the time in either 12 or 24-hour format; press again and adjust the hour if necessary, then it will move to the minutes: confirm by pressing again and you’re done.

Watch the video!


by ScegliAuto

More videos