|
Do it yourself
| |||
| ||||
Model: Ktm Sxf 450
In this guide, you will learn how to service the water pump, including replacing the coolant on a KTM SXF 450, in simple and quick steps. First, bleed the cooling system by unscrewing the drain bolt for the coolant located under the water pump cover; then unscrew all the fixing screws to remove the cover. At this point, unscrew the nut of the impeller to remove it; replace the oil seal and the various gaskets included in the kit, inserting them correctly and reassembling everything!
Updated on 19 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Sxf 450
In today's tutorial video, follow the main steps to replace the coolant on the KTM SXF 450 with these simple instructions. First, drain the old coola…
Sxf 450
This guide shows you how to perform the routine maintenance service by changing the engine oil and oil filter on the KTM SXF 450, following these sim…
Sxf 450
In order to replace the air filter of the KTM SXF 450, you will need to loosen the screws that secure the side panel of the motorcycle, located under…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.055
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
