Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Sxf 450
Part: Engine oil

This guide shows you how to perform the routine maintenance service by changing the engine oil and oil filter on the KTM SXF 450, following these simple steps. First, position your bike on a stand and start by removing the metal cover located under the engine by unscrewing the fixing screws; then, unscrew the oil drain bolt and let the oil drain into a container. At this point, remove and replace, or clean, the oil filter; finally, pour the new oil into the crankcase and fill to the correct level!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the KTM SXF 450
How to Change the Engine Oil of the KTM SXF 450
Sxf 450 To change the engine oil of the KTM SXF 450, loosen the drain plug located at the bottom of the bike to collect all the used oil in a suitably positi…
How to replace the engine oil and oil filter of the KTM SX-F 450
How to replace the engine oil and oil filter of the KTM SX-F 450
Sxf 450 The information provided in this guide will show us how to perform the regular maintenance service, replacing the engine oil and oil filter, of the K…
How do you replace the motor oil of the KTM SXF 450?
Sxf 450 It will be possible to replace the engine oil in the KTM SXF 450 system by loosening the drain plug located at the bottom of the motorcycle, so that …

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos