How to Replace the Air Filter on the KTM Duke 390

Model: Ktm Duke 390
Part: Air filter

This video is currently unavailable

In this video tutorial, you will learn how to replace the engine air filter on the KTM Duke 390 in simple and quick steps. First, place the stand on your bike and start by removing the rider's seat.

Next, unscrew the screws of the plastic cover to take out the filter and replace it with a new one, as shown in the video. At this point, insert the new air filter in the correct orientation; then refit the cover, securing its screws, and reinstall the rider's seat to complete the job!

Updated on 16 May 2026 by ScegliAuto

Related tutorials

How to Replace the Air Filter on a KTM Duke 390

Duke 390 Before you can start, position your KTM Duke 390 on its side stand. Begin by removing the passenger seat using the motorcycle key. Next, unclip and r…

Replacement of Air Filter on KTM Duke 250/390 2017

Duke 390 Descriptive guide for replacing the air filter on a 2017 KTM DUKE 250/390. Obtain an air filter KTM p. N.90106015000. Position the motorcycle on the …

How to Replace the Air Filter in a KTM Duke 390

Duke 390 As shown in this tutorial, replacing the air filter in the KTM Duke 390 is an extremely simple and quick operation. First, remove the passenger seat,…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!

by ScegliAuto

How to Replace the Air Filter on the KTM Duke 390

Related tutorials

How to Reset the Service Light on the Gilera Nexus 500

More videos