Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Exc 250
Part:

In this video, follow the main steps to remove the plastics or fairings and the rear tail section on the KTM EXC 250-F enduro bike, in simple steps. First, remove the rider's seat; then unscrew the screws of the side fairings to take them off. At this point, disconnect the various wiring found at the rear of the bike; then unscrew the main pins of the tail section to separate it from the rest of the frame, as shown in the video. Finally, replace it with the new one by applying the reverse procedure of disassembly!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wheel on a KTM Exc 250
How to Replace the Front Wheel on a KTM Exc 250
Exc 250 The following steps will guide you through removing and replacing the front wheel on the KTM Exc 250 enduro bike, as well as the Exc 300 and Exc 125 …
How to Dismantle the Engine of a KTM EXC 250?
How to Dismantle the Engine of a KTM EXC 250?
Exc 250 The engine block of the KTM EXC 250 can be dismantled by loosening the screws that secure the engine block within its housing, completely removing it…
How to Replace the Rear Brake Pads on the KTM EXC 250
How to Replace the Rear Brake Pads on the KTM EXC 250
Exc 250 This guide provides instructions to remove and replace the rear brake pads on the KTM EXC 250 enduro motorcycle, as well as the EXC 300 and XC models…

How to Replace the Air Filter on the Benelli TRK 502X?

On the Benelli TRK 502X, you can replace the air filter by unscrewing the screws that secure the fairings located on the front side of the bike, near the tank: once these panels are removed, proceed by loosening the screws that secure the tank and disconnecting all the hoses and connectors underneath. This will give you access to the air filter box, which can be opened by loosening the screws that secure the cover: at this point, remove the old filter so that you can insert the replacement.

Watch the video!


by ScegliAuto

More videos