Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exhaust on a Derbi Atlantis

Model: Derbi Atlantis
Part: Exhaust muffler

Video tutorial

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video.

At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!


Updated on 23 September 2026 by ScegliAuto


Related tutorials

Removing the Clutch Cover on a Derbi Atlantis
Removing the Clutch Cover on a Derbi Atlantis
Atlantis Today, we will see, in this short and simple guide, how to remove and replace the clutch cover on the Derbi Atlantis scooter, following the instructi…
How to Remove the Flywheel and Fan from the Derbi Atlantis
How to Remove the Flywheel and Fan from the Derbi Atlantis
Atlantis Today, we will see the procedure for removing and replacing the flywheel and its fan on the Derbi Atlantis, following the instructions below. First, …
How to Remove the Front Suspension of the Derbi Atlantis
How to Remove the Front Suspension of the Derbi Atlantis
Atlantis To remove the suspension from the Derbi Atlantis, loosen the nuts that secure the front wheel spindle. By removing these nuts, you can slide out the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos