Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Updated on 5 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace and install the mirrors of the Royal Enfield Interceptor 650.
How to replace and install the mirrors of the Royal Enfield Interceptor 650.
Interceptor 650 In this short and simple guide, we will see how to replace and install the rearview mirrors on the Royal Enfield Interceptor 650 motorcycle. First, w…
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
Interceptor 650 The replacement of the exhaust of the Royal Enfield Interceptor 650 can be done by loosening the screws on the appropriate supports located on the le…
How do you replace the battery of the Royal Enfield Interceptor 650?
How do you replace the battery of the Royal Enfield Interceptor 650?
Interceptor 650 The battery installed on the Royal Enfield Interceptor 650 can be replaced by opening the corresponding cover located on the right side of the vehicl…

How to replace the headlight bulbs on a Suzuki GSXR 600?

In this tutorial, you will see how to replace the headlight bulbs on a Suzuki GSXR 600, an extremely simple and quick operation. First, ensure that the key is not inserted, then unscrew the two indicated screws and separate the dashboard from the support. Next, disconnect the power connectors of the bulbs, remove the rubber caps, and unclip the metal clips to extract the bulbs from their respective housings. At this point, you can insert the replacements, avoiding touching the glass directly with your bare hands, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos