Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace and install the mirrors of the Royal Enfield Interceptor 650.

Model: Enfield Interceptor 650
Part:

Video tutorial

In this short and simple guide, we will see how to replace and install the rearview mirrors on the Royal Enfield Interceptor 650 motorcycle. First, we put the motorcycle on the stand and start disassembling and removing the original external rearview mirrors by unscrewing them from the base; in this case, we will install the new mirrors on the handlebars, as shown in the video.

At this point, we unscrew the screws of the handlebars to remove them, then install the new mirrors on both sides; finally, we adjust the angle of the mirrors, following the video tutorial until the end!


Posted on 12 March 2025 by ScegliAuto


Related tutorials

How to Replace the Handlebars on the Royal Enfield Interceptor 650?
How to Replace the Handlebars on the Royal Enfield Interceptor 650?
Interceptor 650 To replace the handlebars on the Royal Enfield Interceptor 650, first remove the mirrors from the old handlebars by rotating them. Next, loosen and d…
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
Interceptor 650 The replacement of the exhaust of the Royal Enfield Interceptor 650 can be done by loosening the screws on the appropriate supports located on the le…
How do you replace the battery of the Royal Enfield Interceptor 650?
Interceptor 650 To replace the battery on the Royal Enfield Interceptor 650, it is necessary to open the specific cover with the key located on the right side of the…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos