|
Do it yourself
| |||
| ||||
Model: Ktm Exc 125
Follow these instructions to remove and replace the air filter of the engine of the KTM EXC 125 enduro bike. First, remove the rider's seat and unscrew the side screws of the fairing; then, take out the foam air filter from its holder, as shown in the video. At this point, use a suitable degreaser to clean and lubricate the air filter; if the filter is damaged, proceed with the replacement. Then, refit the filter onto the holder, followed by the fairing and the seat!
Updated on 2 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Exc 125
In this brief and simple guide, learn how to disassemble and replace the air filter of the engine on the KTM EXC 125 enduro bike. First, remove the s…
Exc 125
Before you begin, position your KTM EXC 125 upright. Start by unfastening and removing the left rear side cover by simply pulling it towards you. Thi…
Exc 125
How to change the oil and filter on a KTM EXC 125? Follow this guide to proceed with the replacement. Position the motorcycle on a stand; remove the …
|
How to replace the coolant in the BMW S1000 R
Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
