Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Time on the KTM RC 125

Model: Ktm Rc 125
Part: Clock

Video tutorial

To manually and correctly set the exact time on the dashboard of your KTM RC 125, follow these simple steps. First, position your bike on its stand and turn it off completely.

Start the central dashboard and then locate the "Mode" and "Set" buttons on the left side of the dashboard. Press and hold both buttons for about 3-4 seconds, and once the time starts to flash, release them.

Now use the same buttons to adjust both the minute and hour digits. Finally, press and hold both buttons again to save the changes.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Rc 125 In this tutorial, we can see how to adjust the time on the KTM RC 125, an extremely simple and quick operation to be carried out, for example, after …
Rc 125 .. In this tutorial, you can see how to set the time on the KTM RC 125, a very simple and quick operation to perform after disconnecting.. …
Rc 125 .. In this tutorial, you will learn how to set the time on the KTM RC 125, a simple and quick operation to perform after replacing the battery.. …

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos