Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Exc 250
Part: Engine oil

In this brief guide, you will find instructions on how to perform the routine maintenance service by changing the engine oil on the KTM EXC 250 enduro bike. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small mesh oil filter, replacing it if damaged, as shown in the video. At this point, unscrew the filler cap and top up with new oil suitable for your engine; finally, start the engine and let it warm up, checking the level afterwards!

Updated on 14 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Exc 250 In this video, you will learn how to change the gear oil on a KTM EXC 250, following the instructions below. First, position the stand on your bike a…
Exc 250 In this video tutorial, you will see how to change the oil in the gearbox of the KTM EXC 250 enduro bike in simple and quick steps. First, warm up th…
Exc 250 To change the engine oil on the KTM EXC 250, loosen the drain plug of the oil sump, which is located at the central bottom of the bike: once this plu…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos