Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this short and simple guide, you will learn how to replace the coolant in a KTM RC 200 motorcycle, as well as in the 125 and 390 models. First, place your motorcycle on a stand and start unscrewing the screws of the right side fairing to remove it; then unscrew the coolant drain screw, located on the lower casing, allowing the fluid to drain into a container for about ten minutes. At this point, unscrew the radiator cap and top up with new antifreeze suitable for your radiator!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a KTM RC 200?
How to Replace the Clutch on a KTM RC 200?
Rc 200 To replace the clutch on a KTM RC 200, loosen the cover panel located on the right side of the bike, in the lower central area. Once the panel is rem…
Replace the Air Filter on the KTM RC 200
Replace the Air Filter on the KTM RC 200
Rc 200 In this video, follow the instructions to remove and replace the engine air filter on a KTM RC 200 motorcycle, as well as the 390. First, remove the …
How to replace the rear brake pads on the KTM RC 200?
How to replace the rear brake pads on the KTM RC 200?
Rc 200 In this tutorial we can see how to replace the rear brake pads on the KTM RC 200, an extremely simple and quick operation. First of all, position you…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos