Do it yourself
Frequently asked questions about cars and motorcycles
In this mini guide for your KTM RC 200, you will learn how to correctly perform a manual reset of the service light that appears on your bike's dashboard at each start. First, insert the key and turn on the ignition. Then, locate the "Mode" and "Set" buttons on the left side of the dashboard and press "Mode" multiple times until you see the total kilometres travelled. At this point, press and hold the "Set" button and release it as soon as the reset is successfully completed. Finally, turn off the ignition or start the engine to get moving.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Rc 200 To manually reset the service light that appears on the dashboard of your KTM RC 200 takes just a few seconds. Here's how to do it. First, position y…
Rc 200 In this tutorial, we will see how to reset the service on the KTM RC 200, an operation that is extremely simple and quick, to be performed only after…
Rc 200 In this tutorial, you will see how to reset the service on the KTM RC 200, a very simple and quick operation to perform only after completing all sch…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos