|
Do it yourself
| |||
| ||||
How to Change the Engine Oil of the KTM Duke 200
Model: Ktm Duke 200
Video tutorial
To change the engine oil of the KTM Duke 200, first loosen the oil drain plug located at the bottom of the bike, on the left side. Once the plug is loosened, allow all the oil to drain into a suitably positioned container. Next, remove the screws securing the oil filter cover, which is located on the lower right side. Finally, top up by pouring the new oil through the breather on the right side of the bike.
Updated on 21 July 2026 by ScegliAuto
Related tutorials
Duke 200
In this tutorial, you will see how to change the engine oil in the KTM Duke 200, a very simple and quick operation. First, ensure that the engine is …
Duke 200
In this tutorial, you will see how to change the engine oil in a KTM Duke 200, a very simple and quick operation. First, ensure the engine is cool en…
Duke 200
Changing the engine oil in the KTM Duke 200, as shown in this tutorial, is a very simple and quick operation. First, ensure the engine is cool enough…
|
How to change the transmission oil on the Honda PCX 150 scooter?
In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
