Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Tyre of the KTM Exc 450

Model: Ktm Exc 450
Part: Tires

Video tutorial

Today's guide will show you the steps to remove and replace the rear wheel and tyre of the KTM Exc 450 enduro bike. First, place the bike on a stand and start loosening the central axle nut of the rear wheel using a socket spanner.

Then, disconnect the rear brake caliper and remove the wheel, as shown in the video. At this point, replace the tyre by deflating it and prying the sides of the rim to remove it. Next, install the new tyre and finally reattach the wheel, following the reverse procedure!


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How do you replace the front headlight of the KTM EXC 450?
How do you replace the front headlight of the KTM EXC 450?
Exc 450 To replace the front headlight of the KTM EXC 450, you need to loosen the screws that secure the front fairing panel to its housing: these screws wil…
How to Replace the Stator on a KTM EXC 450
How to Replace the Stator on a KTM EXC 450
Exc 450 In today's video tutorial, we will go through the main steps to remove and replace the stator on the KTM EXC 450 enduro bike. First, remove the side …
How to Perform a Service on the KTM EXC 450
How to Perform a Service on the KTM EXC 450
Exc 450 In this guide, see how to perform a routine maintenance service by replacing the engine oil and oil filter on the KTM EXC 450 enduro bike. First, rem…

How to Replace the Wing Mirror on a Harley Davidson Sportster

To replace the wing mirror on a Harley Davidson Sportster, loosen the nut located at the base of the mirror, at the bottom of the handlebars. Once this nut is fully loosened, you can slide out the pin that secures the mirror to the handlebars, completely removing the old mirror from its housing and replacing it with a new replacement part. The new mirror should be positioned, inserting the corresponding pin, and finally secured by tightening the nut at the bottom of the handlebars.

Watch the video!


by ScegliAuto

More videos