Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure for changing the engine oil and oil filter is within everyone's reach; let's see how to service the KTM Adventure 390. First, place the bike on the centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one. At this point, unscrew the filler cap and top up with new oil, following the instructions in the user and maintenance manual.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Oil and Oil Filter on the KTM Adventure 390
Replacing the Engine Oil and Oil Filter on the KTM Adventure 390
Adventure 390 In this brief guide, you will find the instructions to carry out the routine maintenance service for changing the oil and oil filter on the KTM Adven…
How to change the engine oil in the KTM Adventure 390?
How to change the engine oil in the KTM Adventure 390?
Adventure 390 In this tutorial, you will learn how to change the engine oil in the KTM Adventure 390, a very simple and quick operation. First, wait until the engi…
How to Replace the Air Filter on the KTM Adventure 390?
How to Replace the Air Filter on the KTM Adventure 390?
Adventure 390 You can replace the air filter on the KTM Adventure 390 by removing the seat from its housing to access the components underneath: once the seat is r…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos