Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the headlight bulb in the KTM Super Duke 1290 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the two screws on either side of the headlamp and unscrew them using a Torx screwdriver. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, you can release the metal clip, remove the old bulb, and insert the replacement. To reassemble everything, simply follow the reverse procedure.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the KTM Super Duke 1290 R?
How to replace the headlight bulb on the KTM Super Duke 1290 R?
Super Duke 1290 R To replace the headlight bulb on the KTM Super Duke 1290 R, loosen the two screws located on the upper side of the headlight assembly: once these two…
How do you replace the radiator of the KTM Super Duke 1290 R?
How do you replace the radiator of the KTM Super Duke 1290 R?
Super Duke 1290 R In order to replace the radiator of the KTM Super Duke 1290 R, you need to loosen the screws that secure the side panels of the motorcycle, located j…
How to Replace the Front Brake Pads on a KTM Super Duke 1290 R?
How to Replace the Front Brake Pads on a KTM Super Duke 1290 R?
Super Duke 1290 R Below are the instructions that will allow you to remove and replace the front brake pads on a KTM Super Duke 1290 R motorcycle. First, place the mot…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos