Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a KTM Duke 390?

Model: Ktm Duke 390
Part: Clock

Video tutorial

In this tutorial, you will see how to set the time on a KTM Duke 390, a very simple and quick operation to perform, for example, after replacing the battery or when switching to daylight saving time. First, insert the key and turn on the instrument panel.

Then, press and hold the two buttons located to the left of the dashboard until the time starts to flash. At this point, adjust the hour by repeatedly pressing the upper button, adjust the minutes with the lower button, and save the setting by pressing both buttons again.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to adjust the time on the KTM Duke 390?
How to adjust the time on the KTM Duke 390?
Duke 390 In this tutorial, we can see how to adjust the time on the KTM Duke 390, an extremely simple and quick operation to perform, for example, after disco…
How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
How to set the time on the KTM Duke 390
How to set the time on the KTM Duke 390
Duke 390 If you own a KTM Duke 390 and the central display shows the wrong time, all you have to do is follow the following procedure to set the correct time.…

How to Reset the Service Light on the Gilera Nexus 500

This video shows the procedure to reset the service light on the Gilera Nexus when the light remains on after a service. The procedure is straightforward and takes less than a minute. To reset the light, press the mode button and the odo/set button simultaneously. While holding them down, turn the ignition key to the ON position. Once the instruments are on, release the buttons and press the mode button once. The maintenance light will illuminate; hold the mode button for a few seconds to reset it.

Watch the video!


by ScegliAuto

More videos