|
Do it yourself
| |||
| ||||
How to set the time on the KTM Duke 200?
Model: Ktm Duke 200
Video tutorial
In this tutorial, you will learn how to set the time on the KTM Duke 200, a very simple and quick operation to perform, for example, after disconnecting the battery or after switching to daylight saving time. First, insert the key, then turn on the ignition and hold down the two buttons on the left side of the display until the time starts to flash. Once this is done, adjust the hour using the upper button and the minutes using the lower button. To save the setting, simply press both buttons again.
Updated on 19 September 2026 by ScegliAuto
Related tutorials
Duke 200
In this tutorial, you will see how to set the time on a KTM Duke 200, a very simple and quick operation, for example, after replacing the battery or …
Duke 200
In this tutorial we can see how to adjust the time on the KTM Duke 200, an extremely simple and quick operation, to be carried out for example after …
Duke 200
In this tutorial, see how to set the time on a KTM Duke 200, a very simple and quick operation to perform, for example, after disconnecting the batte…
|
How to replace the air filter on the Aprilia Tuareg 660?
To replace the air filter on the Aprilia Tuareg 660, loosen the screws securing the panel located at the front of the vehicle, just behind the handlebars. Once these screws are loosened, remove the panel to access the underlying filter. The old filter can be extracted, and a new one can be inserted into its housing. After replacement, cover the filter with the panel and check that the engine is running properly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
