Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a KTM 390 Adventure

Model: Ktm 390 Adventure
Part: Service warning light

Video tutorial

If you want to manually reset the service light on the dashboard of your KTM 390 Adventure, carefully read the following guide and follow the steps described. First, ensure your KTM 390 Adventure is on its stand, then turn on the ignition and press the button with the right arrow to display the options list on the left of the display.

Scroll down and position the cursor on "Settings". Press and hold the up and down arrow buttons simultaneously and release them as soon as the new screen appears. Finally, manually select the remaining kilometres until the next service.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a KTM 390 Adventure?
How to Reset the Service Light on a KTM 390 Adventure?
390 Adventure To reset the service light on a KTM 390 Adventure, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is illumina…
How to Reset the Service on the KTM 390 Adventure?
How to Reset the Service on the KTM 390 Adventure?
390 Adventure In this tutorial, see how to reset the service on the KTM 390 Adventure, a very simple and quick operation, to be done only after completing all sche…
How to Replace the Exhaust on a KTM 390 Adventure
How to Replace the Exhaust on a KTM 390 Adventure
390 Adventure To replace the exhaust on a KTM 390 Adventure, loosen the screws that secure it to the brackets on the right rear of the bike. Once the bracket screw…

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos