Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the KTM Duke 390?

Model: Ktm Duke 390
Part: Service warning light

Video tutorial

In this tutorial, you will learn how to reset the service light on the KTM Duke 390, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. Start by inserting the key, then turn on the instrument panel and, using the "MODE" button, navigate to the "ODO" odometer.

Next, scroll through the various information using the "RESET" button until you reach the service interval and reset it by holding down the same button. Afterwards, restart the vehicle and check that the operation was successful.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
How to Reset the Service Light on the KTM Duke 390
How to Reset the Service Light on the KTM Duke 390
Duke 390 In this guide, follow the instructions to reset the maintenance light for the engine oil change on the KTM Duke 390. First, place the bike on a stand…
Resetting the service light indicator of the KTM Duke 390.
Resetting the service light indicator of the KTM Duke 390.
Duke 390 Today's step-by-step instructions will show us how to reset the maintenance service light for the regular oil change of the KTM Duke 390. First, we p…

How to Replace the Rear Brake Pads on a Benelli TRK 502X?

To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the corresponding caliper so that it can be detached from the brake disc: once the caliper is removed from its disc, you can proceed to detach it and remove the pin that secures the pads inside the caliper. At this point, you can remove the old pads from their seat to insert the new ones: these must be secured properly by positioning the caliper and checking that the brake is functioning.

Watch the video!


by ScegliAuto

More videos