Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 390
Part: Engine oil

In this tutorial, we can see how to replace the motor oil in the KTM Duke 390, an extremely simple and quick operation. Before proceeding, we wait for the engine to cool down enough so that we can work safely. We start by placing a container underneath the motorcycle, then we remove the lower fairing and unscrew the drainage hole bolt with an 18mm socket wrench. We then unscrew the secondary filter with a 13mm wrench, clean it from any dirt residue, open the main filter cap and replace it. At this point, all that's left to do is reassemble everything and pour in the new oil through the designated hole.

Posted on 15 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on the KTM Duke 390?
How to change the engine oil on the KTM Duke 390?
Duke 390 To change the engine oil on the KTM Duke 390, unscrew the oil drain plug located at the bottom of the bike to collect the used oil in a suitably posi…
How to Change the Engine Oil on a KTM Duke 390?
How to Change the Engine Oil on a KTM Duke 390?
Duke 390 To change the engine oil on a KTM Duke 390, you need to unscrew the oil drain plug located at the bottom of the bike, allowing the used oil to collec…
How do you replace the motor oil of the KTM Duke 390?
How do you replace the motor oil of the KTM Duke 390?
Duke 390 To perform the oil change on the KTM Duke 390, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos