Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In these short and simple steps, we will see how to disassemble and replace the rear suspension spring of the KTM SX 300 enduro motorcycle. First of all, we put the motorcycle on the stand and start by disconnecting the swing arm found under the rear suspension, removing the central pin; then we remove the rear suspension spring, as shown in the video. At this point, we install the new spring, of the correct type, then reassemble the swing arm and fix it properly; finally, we just need to adjust the suspension preload!

Posted on 12 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Suspension of a KTM SX 300
How to Replace the Rear Suspension of a KTM SX 300
Sx 300 This guide outlines the steps to remove and replace the rear suspension of the KTM SX 300 enduro bike. First, lift the bike and start by removing the…
How to Change the Engine Oil of the KTM SX 300
How to Change the Engine Oil of the KTM SX 300
Sx 300 To change the engine oil of the KTM SX 300, remove the drain plug located at the central lower part of the bike: once this plug is removed, all the u…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos