Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Suspension of a KTM SX 300

Model: Ktm Sx 300
Part: Suspension system

Video tutorial

This guide outlines the steps to remove and replace the rear suspension of the KTM SX 300 enduro bike. First, lift the bike and start by removing the rear wheel by unscrewing the central axle and disconnecting the drive chain.

Next, unscrew the suspension bolt located at the bottom, detaching it from the swingarm. Then, disconnect the suspension at the top, remove it, and replace it with the new one (or just replace the spring); apply the reverse procedure for reassembly!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension Spring on the KTM SX 300
How to Replace the Rear Suspension Spring on the KTM SX 300
Sx 300 Follow these simple steps to remove and replace the rear suspension spring on the KTM SX 300 enduro bike. First, place the bike on a stand and discon…
How to Change the Engine Oil of the KTM SX 300
How to Change the Engine Oil of the KTM SX 300
Sx 300 To change the engine oil of the KTM SX 300, remove the drain plug located at the central lower part of the bike: once this plug is removed, all the u…

How to Dismantle the Engine of a Piaggio Zip?

To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secure the side casing and also removing the spark plug from the top of the cylinder. This way, you can unscrew the bolts that secure it to its seat and then loosen the bolts that attach the connecting rod to the piston. By removing the piston itself, you can also dismantle the connecting rod and subsequently remove all other components located inside the engine block.

Watch the video!


by ScegliAuto

More videos