Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the KTM SX 300

Model: Ktm Sx 300
Part: Engine oil

Video tutorial

To change the engine oil of the KTM SX 300, remove the drain plug located at the central lower part of the bike: once this plug is removed, all the used oil can flow into a suitably positioned container. After all the oil has drained out, close the drain plug to allow for topping up: this is done by inserting a funnel into the breather located on the right side of the bike.

Once the necessary amount of oil is added, close the breather.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension Spring on the KTM SX 300
How to Replace the Rear Suspension Spring on the KTM SX 300
Sx 300 Follow these simple steps to remove and replace the rear suspension spring on the KTM SX 300 enduro bike. First, place the bike on a stand and discon…
How to Replace the Rear Suspension of a KTM SX 300
How to Replace the Rear Suspension of a KTM SX 300
Sx 300 This guide outlines the steps to remove and replace the rear suspension of the KTM SX 300 enduro bike. First, lift the bike and start by removing the…

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos