Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Maxxer 300

Kymco Maxxer 300 - Video guides

Kymco Maxxer 300
How to Replace the Front Brake Pads of the Kymco Maxxer 300?
To replace the front brake pads of the Kymco Maxxer 300, loosen the bolts securing the corresponding wheel to gain access to the components located at its …Read all…
Posted on 8 September 2026 by ScegliAuto
Kymco Maxxer 300
How to Replace the Transmission of the Kymco Maxxer 300?
To replace the transmission of the Kymco Maxxer 300, loosen the screws securing the cover on the left side of the bike, near the rear wheel. Once this cover is …Read all…
Posted on 20 August 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos