Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plug on a Kymco AK 550

Model: Kymco Ak 550
Part: Spark plugs

Video tutorial

Today, let's discover the steps to remove and replace the spark plug of the Kymco AK 550 scooter engine. First, place the scooter on the centre stand and disconnect the electrical connector of the spark plug, then unscrew the fixing screws to remove the cap. Use a socket wrench with an extension to unscrew and remove it, as shown in the video.

Now, install the new spark plug of the correct type and with the same thread pitch, screw it in by hand and then tighten gently with the wrench; finally, reconnect the spark plug connector!


Updated on 13 November 2026 by ScegliAuto


Related tutorials

Ak 550 In this tutorial, you will see how to replace the remote battery of the Kymco AK 550 scooter, a very simple and quick operation. You will need a smal…
Ak 550 The service light indicates that it is necessary to perform maintenance on our vehicle, sometimes it is also used to indicate the need to replace the…
Ak 550 In order to replace the transmission of the Kymco AK 550, you need to loosen the screws that secure the casing located on the right side of the motor…

Resetting the Oil Change Light on a Yamaha Xmax 250

In this brief video tutorial, learn how to reset the service light on a Yamaha Xmax 250. This operation is straightforward and can be done independently after changing the engine oil. Start by turning on the ignition without starting the engine. Then press the "TRIP" button until the display shows the "trip OIL" screen. Next, press and hold the trip button to make the oil change interval kilometres flash. Finally, release the button and press it again until the maintenance interval resets.

Watch the video!


by ScegliAuto

More videos