Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the brake oil of the Kymco Xciting S 400i, you need to loosen the screws that secure the covers located on the sides of the handlebars: these will be located in correspondence of the internal rearview mirrors. Once these covers are removed, you can vacuum the old brake oil from the inside using a tube connected to a syringe: the same operation must be carried out on the brake calipers. Once all the oil has been removed, you can insert the new one from the reservoirs located in correspondence of the lateral calipers of the handlebars.

Posted on 1 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Brake Pads on the Kymco Xciting S 400i
How to Replace the Brake Pads on the Kymco Xciting S 400i
Xciting S 400i In this guide, find instructions on how to remove and replace both the front and rear brake pads of the Kymco Xciting S 400i scooter. First, place yo…
How to Change the Engine Oil on the Kymco Xciting S 400i
How to Change the Engine Oil on the Kymco Xciting S 400i
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, you need to unscrew the oil drain plug located at the bottom of the bike: this will allow you t…
How to Change the Engine Oil on Kymco Xciting S 400i?
How to Change the Engine Oil on Kymco Xciting S 400i?
Xciting S 400i To change the engine oil on the Kymco Xciting S 400i, first unscrew the oil drain plug located at the central lower part of the bike: this will allow…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos