Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the time on the Kymco Dtx 360?

Model: Kymco Dtx 360
Part: Clock

Video tutorial

The screen displayed in the video belongs to the Kymco Dtx 360 and if we pay attention, we will notice the time on the left side, information that we want to adjust here. Well, for this setting it takes very little time, it is within everyone's reach, so let's see what to do: turn on the instrument panel, press and hold the Down Arrow button, located on the right side of the handlebars, and when we notice the time flashing we will press the button to the left of the one mentioned earlier, thus accessing the actual setting, which will always be done using the Arrow keys.

To save everything, press and hold the aforementioned button one last time, located to the left of the directional buttons.


Posted on 2 May 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Kymco DTX 360?
How to replace the battery of the Kymco DTX 360?
Dtx 360 To replace the battery of the Kymco DTX 360, loosen the screws securing the front fairing of the bike, removing both the specific panel and the corre…
How do you change the engine oil of the Kymco DTX 360?
How do you change the engine oil of the Kymco DTX 360?
Dtx 360 The procedure for replacing the motor oil on the Kymco DTX 360 can be carried out by loosening the drain plug of the oil pan, which will be located o…
How to Remove the Fairing of the Kymco DTX 360
How to Remove the Fairing of the Kymco DTX 360
Dtx 360 Today, we will explain how to remove the fairing of the Kymco DTX 306. To perform this operation, remove the front cover of the scooter. Unscrew the …

How to Dismantle the Engine of the Gilera SP 02?

To dismantle the engine of the Gilera SP 02, loosen the bolts securing the engine block to its housing to free it. You will also need to disconnect the intake and exhaust manifolds by unplugging their respective connectors. At this point, remove the cylinder and cylinder head, detaching the piston from the corresponding connecting rod. This will give you access to the crankshaft, allowing you to replace all necessary components. Finally, reassemble the engine, ensuring everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos