Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Dtx 360

Kymco Dtx 360 - Video guides

Kymco Dtx 360
How to Remove the Fairing of the Kymco DTX 360
Today, we will explain how to remove the fairing of the Kymco DTX 306. To perform this operation, remove the front cover of the scooter. Unscrew the screws …Read all…
Posted on 30 March 2026 by ScegliAuto
Kymco Dtx 360
How to Change the Oil on the Kymco DT X360
Let's see how to change the oil on the Kymco TDX360: you will need a 12mm spanner, a syringe to inject the fluid, and a container to drain the used oil, which …Read all…
Posted on 20 March 2026 by ScegliAuto
Kymco Dtx 360
How do you change the engine oil of the Kymco DTX 360?
The procedure for replacing the motor oil on the Kymco DTX 360 can be carried out by loosening the drain plug of the oil pan, which will be located on the left …Read all…
Posted on 5 June 2025 by ScegliAuto
Kymco Dtx 360
How do you adjust the time on the Kymco Dtx 360?
The screen displayed in the video belongs to the Kymco Dtx 360 and if we pay attention, we will notice the time on the left side, information that we want to …Read all…
Posted on 3 May 2025 by ScegliAuto
Kymco Dtx 360
How to set the time on a Kymco DTX360?
To set the time on a Kymco DTX360, follow these steps. Start by turning on the scooter and making sure it is in time display mode on the dashboard. Once you …Read all…
Posted on 5 December 2024 by ScegliAuto
Kymco Dtx 360
How do you replace the battery of the Kymco DTX 360?
In order to replace the battery of the Kymco DTX 360, you need to loosen the screws that secure the front fairing of the motorcycle, removing both the …Read all…
Posted on 28 August 2024 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos