Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Dtx 360
Part: Engine oil

Let's see how to change the oil on the Kymco TDX360: you will need a 12mm spanner, a syringe to inject the fluid, and a container to drain the used oil, which you will then dispose of correctly at an authorised centre. You will also need the oil to replace what you remove; use the oil recommended by the manufacturer. Unscrew the cap and let it drain until the last drop, then take the opportunity to replace the cap with a new one; replace the filter with a new one and also replace the gearbox oil, which you will inject with your syringe. Refill the oil in the engine and the operation is complete.

Posted on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you change the engine oil of the Kymco DTX 360?
How do you change the engine oil of the Kymco DTX 360?
Dtx 360 The procedure for replacing the motor oil on the Kymco DTX 360 can be carried out by loosening the drain plug of the oil pan, which will be located o…
How to Remove the Fairing of the Kymco DTX 360
How to Remove the Fairing of the Kymco DTX 360
Dtx 360 Today, we will explain how to remove the fairing of the Kymco DTX 306. To perform this operation, remove the front cover of the scooter. Unscrew the …
How to set the time on a Kymco DTX360?
How to set the time on a Kymco DTX360?
Dtx 360 To set the time on a Kymco DTX360, follow these steps. Start by turning on the scooter and making sure it is in time display mode on the dashboard. O…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos