Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Ak 550
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Kymco AK550 scooter, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we position a container underneath it, locate the bolts of the two drain holes and unscrew them using a 17mm socket wrench. We then remove the secondary filters, clean them from any dirt residue and continue by unscrewing the main filter. At this point, all that remains is to tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Posted on 19 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Kymco AK550?
How do you replace the engine oil of the Kymco AK550?
Ak 550 To perform the oil change on the Kymco AK550, you will need to loosen the drain plug located in the central lower part of the vehicle so that the old…
How to Reset the Service on a Kymco AK550 Scooter?
How to Reset the Service on a Kymco AK550 Scooter?
Ak 550 In this tutorial, we will see how to reset the service on a Kymco AK550 scooter, a very simple and quick operation to be performed only after complet…
How to replace the engine oil of the Kymco AK 550
How to replace the engine oil of the Kymco AK 550
Ak 550 The service light indicates that it is necessary to perform maintenance on our vehicle, sometimes it is also used to indicate the need to replace the…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos