Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Ak 550
Part: Engine oil

To perform the oil change on the Kymco AK550, you will need to loosen the drain plug located in the central lower part of the vehicle so that the old oil is expelled: this must be collected in a container properly positioned. Once all the oil has drained, you can remove the oil filter located in the central lower part of the motorcycle in order to insert the new one: then you can proceed with topping up. You will need to add the necessary amount of oil through the vent located on the left side of the motorcycle.

Posted on 23 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Ak 550 In this tutorial we can see how to replace the engine oil in the Kymco AK550 scooter, an extremely simple and quick operation. First of all, we wait …
Ak 550 In this tutorial, we will see how to reset the service on a Kymco AK550 scooter, a very simple and quick operation to be performed only after complet…
Ak 550 In this guide, you will learn how to perform routine maintenance by replacing the engine oil and oil filter on a Kymco AK 550 scooter. First, positio…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos