Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Kymco Like 125: how to reset the service light from the instrument panel.

Model: Kymco Like 125
Part: Service warning light

Video tutorial

To reset the service light on the Kymco Like 125, make sure the ignition is off. Locate the small reset/trip button on the right side of the instrument panel. Press and hold this button, and without releasing it, insert the key and turn the ignition to the "on" position, leaving the engine off. Keep holding the button for a few seconds until the maintenance reminder is reset.

At that point, release the button, turn off the ignition, and turn it back on to check that the service warning is no longer present. The maintenance reset on the Kymco Like 125 is now complete.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

How to replace the rear wheel of the Kymco Like 125
How to replace the rear wheel of the Kymco Like 125
Like 125 In this new guide dedicated to all of you who own a Kymco Like 125, we will explain how to correctly replace the rear wheel. First of all, make sure …
How to Replace the Headlight Bulb on a Kymco Like 125?
How to Replace the Headlight Bulb on a Kymco Like 125?
Like 125 To replace the headlight bulb on a Kymco Like 125, loosen the screws securing the front fairing of the motorcycle: the fixing screws are located at t…
How to Replace the Drive Belt on the Kymco Like 125
How to Replace the Drive Belt on the Kymco Like 125
Like 125 Today's steps will show you the procedure for removing and replacing the drive belt on the Kymco Like 125 scooter. First, place the scooter on its ce…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos