Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Kymco Downtown GT 350i

Model: Kymco Downtown 350
Part: Air filter

Video tutorial

Next, we will discover the instructions that will allow us to disassemble and replace the engine air filter of the Kymco Downtown GT 350i scooter. First, we put the scooter on the stand and begin to disassemble and remove the air filter box by unscrewing the fastening screws located on it; then we remove the filter cartridge found inside, as shown in the video.

At this point, we replace and install the new engine air filter, inserting it in the correct direction; finally, we secure the filter box to the air intake duct!


Posted on 26 January 2026 by ScegliAuto


Related tutorials

How to Dismantle the Variator of the Kymco Downtown 350i
How to Dismantle the Variator of the Kymco Downtown 350i
Downtown 350 Today, you will see the main instructions that will allow you to dismantle and replace the variator, belt, and rollers of the Kymco Downtown 350i sco…
How to Set the Clock on the Kymco Downtown 350i
How to Set the Clock on the Kymco Downtown 350i
Downtown 350 To change the time on the Kymco Downtown 350i, insert the ignition key into the corresponding slot. Once the instrument cluster is powered on, press …
Battery Replacement on the Kymco Downtown 350i
Battery Replacement on the Kymco Downtown 350i
Downtown 350 To replace the battery on the motorcycle, follow these steps: the battery is located inside the compartment under the seat, so you need to lift the s…

How to Replace the Spark Plug on a Honda Dio Scooter?

In this tutorial, see how to replace the spark plug on a Honda Dio scooter, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then open the seat and, by unscrewing all the indicated screws, remove the entire internal plastic frame. Next, disconnect the spark plug power connector, grasp the spark plug with the appropriate socket spanner, and unscrew it. At this point, simply insert the replacement, tighten it gently, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos