Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Downtown 350
Part:

Today, you will see the main instructions that will allow you to dismantle and replace the variator, belt, and rollers of the Kymco Downtown 350i scooter in simple and quick steps. First, place the scooter on its centre stand and begin dismantling the left side cover, transmission side; to do this, unscrew all the fastening screws located on the sides, as shown in the video. At this point, unscrew the screw of the fan and the clutch bell; then remove the belt and subsequently the variator, replacing everything, following the video tutorial to the end!

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Kymco Downtown GT 350i
How to replace the air filter of the Kymco Downtown GT 350i
Downtown 350 Next, we will discover the instructions that will allow us to disassemble and replace the engine air filter of the Kymco Downtown GT 350i scooter. Fi…
How do you set the clock on the Kymco Downtown 350i?
How do you set the clock on the Kymco Downtown 350i?
Downtown 350 In order to change the time on the Kymco Downtown 350i, you need to insert the ignition key into the corresponding slot: once the instrument panel is…
Battery Replacement on the Kymco Downtown 350i
Battery Replacement on the Kymco Downtown 350i
Downtown 350 To replace the battery on the motorcycle, follow these steps: the battery is located inside the compartment under the seat, so you need to lift the s…

How to Access the Battery in the Benelli 180S?

In this tutorial, you will see how to access the battery in the Benelli 180S, a very simple operation useful if you need to recharge or replace it. First, ensure that the key is not inserted, then remove the passenger seat and, using the provided keys, unscrew the two bolts securing the rider's seat. Once removed, unscrew the screws of the upper plastic bracket, disconnect both terminals starting with the negative, and extract the battery from its housing. To install a replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos