Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the K battery

Model: Kymco Xciting S 400i
Part: Battery

This video is currently unavailable

The battery of the Kymco Xciting S 400i scooter is located under the seat. To replace it, we need to open the seat using the ignition key and unscrew the screws on the battery compartment cover.

Using a 10mm socket wrench, we unscrew the nuts on top of the battery and disconnect the negative connector, then disconnect the positive connector. We remove the cover and take out the battery.

We insert the new battery into the cover and connect the terminals. We screw in the nut and the screws of the cover.

We close the seat to test the battery's functionality.


Posted on 29 January 2026 by ScegliAuto


Related tutorials

How do you replace the battery of the Kymco Xciting S 400i?
How do you replace the battery of the Kymco Xciting S 400i?
Xciting S 400i In order to replace the battery of the Kymco Xciting S 400i, you need to open the underseat compartment by releasing the pin that locks it: once the …
How do you replace the battery of the Kymco Xciting S 400i?
How do you replace the battery of the Kymco Xciting S 400i?
Xciting S 400i The battery installed on the Kymco Xciting S 400i can be replaced by opening the underseat compartment, after unlocking the appropriate lock with its…
How to Replace the Air Filter on the Kymco Xciting S 400i?
Xciting S 400i To replace the air filter on the Kymco Xciting S 400i, loosen the screws securing the cover near the rear wheel, on the left side of the bike, and at…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos